- Full Outdoor radio for 10 GHz free band
- Radio capacity up to 200 Mbps Full Duplex
- Channel spacing from 1,75 MHz to 28 MHz
- Channel tunability from 0,25 MHz
- Hitless ACM (adaptive modulation)
- Radio output power up to +12 dBm
- 4 x GbitEth Interface (2 x port RJ45, 2 x SFP slot)
- Management over separate port
- Built-in Spectrum Analyzer
- SNMP management, SNMP MIB file
- 2 x Power Over Ethernet IEEE 802.3at
- Separate DC Power supply 20-57 V
- Power consumption up to 30 W
- Operational temperature -30 °C to +50 °C
Description
BT10 is a FULL Outdoor and Full Duplex microwave link for free 10,5 GHz band according to VO-R/14/12.2006-38. Configuration settings of the radio allow, compared to the traditional radios, much more variability use of the frequency band:
- Tunability across the entire 10 GHz band, including channels 4 and 7.
- Channeling from 1,75 MHz to 28 MHz.
- Adjustable size of channel bandwidth with a step of 0,25 MHz.
- Channel tunability from 0,25 MHz.
- Asymmetric modulation setting of radio.
- Asymmetric bandwidth setting of radio.
- Combined asymmetric setting of radio (modulation / bandwidth).
- Asymetric hitless ACM.
The above user-settings of the radio allow much a faster, easier and more reliable installation of networks even in highly critical places.
FEATURES
- Software Defined Radio SUMMIT DEVELOPMENT in Full Outdoor version
- Licences for 25 / 50 / 100 / 150 / 200 Mbps transmission speeds
- Digital modulation 4 to 256 QAM with hitless ACM
- 4 x Gigabit Ethernet port (2 x SFP, 2 x RJ45)
- User-adujstable interleaving, FEC
- Jumbo packet transfer of MTU size up to 11 000 bytes
- User-tunable size of buffer
- Advanced port prioritization
- Optimal solution for Tripple Play services with IPTV support
- Supports IEEE 802.1Q VLAN (also QinQ)
- Supports packet-flow control acc. to IEEE 802.3x
- Power supply via Ethernet cable acc. to IEEE 802.3at (contains 2 x PoE+ modules)
- Power supply via separate cable (DC input 20 to 57V)
- Automatic switching to backup power supply
- In case of failure, the radio allows the operation to be switched to backup link
- Built-in spectral analyzer for searching for a free channel
- Easy aligning with the beeper, built-in RSSI indicator or measuring the DC voltage
- Configuration of radio link in Windows, Linux, Android, iOS
- Monitoring of radio parameters by means of IP protocol, with implemented SNMPv2
- Monitoring of device parameters in real time (input voltage, current, power ...)
- Automatic detection of radio polarization
- Direct installation of parabolic antenna
Specification
General RF |
||||
Frequency band | 10,3 - 10,6 GHz acc. to VO-R/14/12.2006-38 | |||
Channel spacing | 1,75 to 28 MHz | |||
Asymmetric Bandwidth | Yes | |||
FEC | Reed-Solomon, Interleaving | |||
ACM | Yes | |||
Frequency stability | ± 5 ppm | |||
Transmitter |
||||
Output RF power | -20 to +10 dBm (± 1 dB) | |||
APC (Autom. Power Control) | Yes | |||
APCmin, APCmax | Yes |
28 MHz channel |
||
Capacity of radio [Mbps] | Modulation | Sensitivity for BER 10-6 [dBm] |
197 | 256 QAM | -67 |
172 | 128 QAM | -70 |
147 | 64 QAM | -73 |
123 | 32 QAM | -76 |
98 | 16 QAM | -80 |
49 | 4 QAM | -85 |
14 MHz channel |
||
Capacity of radio [Mbps] | Modulation | Sensitivity for BER 10-6 [dBm] |
98 | 256 QAM | -70 |
86 | 128 QAM | -73 |
73 | 64 QAM | -76 |
61 | 32 QAM | -79 |
49 | 16 QAM | -83 |
24 | 4 QAM | -88 |
7 MHz channel |
||
Capacity of radio [Mbps] | Modulation | Sensitivity for BER 10-6 [dBm] |
49 | 256 QAM | -73 |
43 | 128 QAM | -76 |
36 | 64 QAM | -79 |
30 | 32 QAM | -82 |
24 | 16 QAM | -86 |
12 | 4 QAM | -91 |
User interfaces |
|
Eth1, Eth2 | 2 x 10/100/1000 Base-T |
SFP1, SFP2 | 2 x 1000Base-SX / 1000Base-LX |
GUI | SMS (Windows, Linux-Wine) |
WUI | SMS (Web browser) |
MUI | SMS (Android, iOS) |
Power Supply & Cable |
|
Power Over Ethernet | IEEE 802.3at (PoE+) |
Separate DC Power supply | 20-57 VDC |
Consumption | up to 30 W |
Cable | Outdoor FTP CAT5e max. 100 m |
Environmental |
|
Operational temperature | -20°C to 50°C |
Ingress Protection | IP-67 |
Mechanical |
|
Mechanical concept | Full Outdoor |
Dimension | 145 mm x 240 mm x 240 mm |
Weight | 3,5 kg |
Compliance |
|
IEEE 802.3 | 1000 Base-TX, 1000 Base-T |
IEEE 802.3az | Energy Efficient Ethernet |
IEEE 802.3x | Flow Control |
IEEE 802.1q | VLAN tagging, QinQ |
IEEE 802.3u | Auto-Negotiation protocol |
IEEE 802.3at | Power Over Ethernet plus |
Accessories
Antennas
-
Parabolic antennas 10GHz
ANT 10B35:
-
10,15 - 10,8 GHz
-
Diameter 35 cm
-
Gain 29,4 dBi
-
Operational temp. -40 °C to 55 °C
-
ETSI EN 302 217 Class3
ANT 10B65:
-
10,15 - 11,7 GHz
-
Diameter 65 cm
-
Gain 35,7 dBi
-
Operational temp. -40 °C to 55 °C
-
ETSI EN 302 217 Class3
ANT 10A90:
-
10,15 - 11,7 GHz
-
Diameter 90 cm
-
Gain 37,8 dBi
-
Operational temp. -40 °C to 55 °C
-
ETSI EN 302 217 Class3 (with absorb. material)
ANT 10A120:
-
10,15 - 11,7 GHz
-
Diameter 114 cm
-
Gain 40,2 dBi
-
Operational temp -40 °C to 55 °C
-
ETSI EN 302 217 Class3 (with absorb. material)
-
Power Supplies
-
Power Supplies to BT links
BT link can be powered by a separte power cable in the range 20-57V DC or by Ethernet cable (according to Power Over Ethernet IEEE 802.3at).
PoE injekctors availaible in our store:
PowerDsine 90001G-40- Gigabit PoE AC adaptér
- IEEE 802.3at
- AC input 100-240 V
- 40 W
- -10°C až 45°C
- datasheet
Phihong POE36D-1AT
- Gigabit PoE DC adaptér
- IEEE 802.3AT
- DC input 36-72V
- 33,6 W
- -20°C až 50°C
-
datasheet
To download
Firmware
-
CPU2.9.91Firmware for processor upgrade.
Software
-
RF PATH5.2 (ver. DB 4.0)Radio Planning Tool software to assist the design of microwave radio links. Radio link calculator compute the Fade Margin, Received Signal Strength, Radio Distance and more.
-
SMS10.6.72The "Summit management System" is the grapical user interface used to manage and configure radio. There is no need to install it. The SMS runs on MS Windows or Linux using WINE.
SNMP
-
CACTI template3.3CACTI tempates for BT links
Document
-
Quick Install Manual1.1
-
SMS - user manual1.0The "Summit management System" is the grapical user interface used to manage and configure radio. There is no need to install it. The SMS runs on MS Windows or Linux using WINE.