- Full Outdoor radio for 24 GHz free band
- Up to 902 Mbps throughput
- 150 MHz bandwidth
- One universal radio unit
- Radio output power up to +6 dBm
- 4 x GbitEth Interface (2 x port RJ45, 2 x SFP slot)
- Separate management port
- Supports jumbo frames 11000 bytes
- Built-in Spectrum Analyzer
- SNMP management, SNMP MIB file
- 2 x Power Over Ethernet IEEE 802.3at
- Power supply 20-57 VDC
- Power consumption up to 35 W
- Operational temperature -30 °C to +50 °C
Description
BT24 UNI is a Full-Duplex microwave link operating in the 24 GHz license-free band. The radio can provide up to 902 Mbps throughput using 128 QAM modulation and 150 MHz bandwidth. Radio also offers an advanced Ethernet settings.
It is designed as one universal Full Outdoor Unit with direct mounting to a parabolic antenna. Link uses cross-polarization connection, therefore one side of the link must be installed in vertical polarization and the other side in the horizontal polarization.
These properties give service providers great flexibility and speed in building up their networks. Top-quality components and durable cast-aluminium design allows radio link used in very difficult climatic conditions.
FEATURES
- Software Defined Radio SUMMIT DEVELOPMENT
- Transmission capacity up to 902 Mbps
- One universal unit for both sides of the link
- Cross-polarization connection of radio
- 4 x Gigabit Ethernet port (2 x SFP, 2 x RJ45)
- Jumbo packet transfer of MTU size up to 11 000 bytes
- Security and Access management, digitally encrypted transmitter
- Advanced QoS Port-based and Bandwidth control Management
- Optimal solution for Triple Play services with IPTV support
- Support IEEE 802.1Q VLAN (also QinQ)
- Support packet-flow control acc. to IEEE 802.3x
- Power supply via Ethernet cable acc. to IEEE 802.3at
- Power supply via separate cable (DC input 20 to 57V)
- Automatic switching to backup power supply (PoE1, PoE2, PWR)
- Built-in spectral analyzer for searching for free channel
- Easy aligning with the beeper, built-in RSSI indicator or measuring the DC voltage
- Configuration of radio link in Windows, Linux, Android, iOS
- Monitoring of radio parameters by means of IP protocol, with implemented SNMPv2
- Monitoring of device parameters in real time (input voltage, current, power …)
- Automatic detection of radio polarization
- Direct installation of parabolic antenna
Specification
General RF |
||||
Frequency band | 24,00-24,25 GHz | |||
Bandwidth | 14 to 150 MHz | |||
Asymetric Bandwidth | YES | |||
ACM | YES | |||
FEC | Reed-Solomon, Interleaving | |||
Frequency stability | ± 5 ppm | |||
Transmitter |
||||
Output RF power | -25 to +6 dBm (± 1 dB) | |||
APC (Autom. Power Control) | YES | |||
APCmin, APCmax | YES | |||
Regulation APC by RSSI | YES |
Transmission symmetric capacity (112 / 112 MHz) |
||||
Bandwidth [Mbps] | Modulation | Capacity of radio [Mbps] | Sensitivity for BER 10-6 [dBm] | Sensitivity for BER 10-9 [dBm] |
112 / 112 | 256 QAM* | 770 | -58 | -56 |
112 / 112 | 128 QAM | 674 | -62 | -60 |
112 / 112 | 64 QAM | 577 | -65 | -63 |
112 / 112 | 32 QAM | 481 | -69 | -67 |
112 / 112 | 16 QAM | 385 | -72 | -70 |
112 / 112 | 4 QAM | 192 | -77 | -75 |
* there may be a resudial error rate of 256 QAM with using a bandwidth above 80 MHz
Transmission asymmetric capacity (150 / 50 MHz) |
||||
Bandwidth [Mbps] | Modulation | Capacity of radio [Mbps] | Sensitivity for BER 10-6 [dBm] | Sensitivity for BER 10-9 [dBm] |
150 / 50 | 128 QAM | 902 / 300 | -60 | -58 |
150 / 50 | 64 QAM | 772 / 257 | -63 | -61 |
150 / 50 | 32 QAM | 644 / 214 | -67 | -65 |
150 / 50 | 16 QAM | 515 / 171 | -70 | -68 |
150 / 50 | 4 QAM | 274 / 91 | -75 | -73 |
User interfaces |
|
Eth1, Eth2 | 2 x 10/100/1000 Base-T |
SFP1, SFP2 | 2 x 1000Base-SX / 1000Base-LX |
GUI | SMS (Windows, Linux-Wine) |
WUI | SMS (Web browser), read-only |
MUI | SMS (Android, iOS) |
Power Supply & Cable |
|
Power Over Ethernet | IEEE 802.3at (PoE+) |
Separate DC Power supply | 20-57 VDC |
Consumption | up to 30 W |
Cable | Outdoor FTP CAT5e max. 100 m |
Environmental |
|
Provozní rozsah teplot | -20°C až 50°C |
Stupeň krytí | IP-67 |
Mechanical |
|
Mechanical concept | Full Outdoor |
Dimension | 145 mm x 240 mm x 240 mm |
Weight | 3,5 kg |
Compliance |
|
IEEE 802.3 | 1000 Base-TX, 1000 Base-T |
IEEE 802.3az | Energy Efficient Ethernet |
IEEE 802.3x | Flow Control |
IEEE 802.1q | VLAN tagging, QinQ |
IEEE 802.3u | Auto-Negotiation protocol |
IEEE 802.3at | Power Over Ethernet plus |
Antennas |
||
Name | Diameter [cm] | Gain [dBi] |
ANT24D35-C3 | 35 | 36 |
ANT24D65-C3 | 65 | 41 |
ANT24A90-C3 | 90 | 44 |
ANT24A120-C3 | 120 | 45,5 |
Accessories
Antennas
-
Parabolic antenna 24 GHz
ANT 24D35-C3:
-
24,00 - 24,25 GHz
-
Diameter 35 cm
-
Gain 36 dBi
-
Weight 7,8 kg
-
Operational temp. -40 °C to 55 °C
-
ETSI EN 302 217 Class3
ANT 24D65-C3:
-
24,00 - 24,25 GHz
-
Diameter 65 cm
-
Gain 41 dBi
-
Weight 11,5 kg
-
Operational temp. -40 °C to 55 °C
-
ETSI EN 302 217 Class3
ANT 24A90-C3:
-
24,00 - 24,25 GHz
-
Diameter 90 cm
-
Gain 44 dBi
-
Weight 19 kg
-
Operational temp. -40 °C to 55 °C
-
ETSI EN 302 217 Class3
ANT 24A120-C3:
-
24,00 - 24,25 GHz
-
Diameter 114 cm
-
Gain 45,5 dBi
-
Weight 28 kg
-
Operational temp. -40 °C to 55 °C
-
ETSI EN 302 217 Class3
-
Connectors
-
Connectors for BT links
The following is the list of connectors and seals supplied to the BT links.
-
1 x cable gland, 2 x rubber seal (SET1)
-
4 x stopper - MK0143/1
-
1 x DC power connector - E838A15EDGK352P
Another number of connectors and seals must be specified in your order!
SET1 (for Eth1, Eth2, PWR)
SET2 (for SFP1, SFP2)
Stopper (for Eth1, Eth2, SFP1, SFP2, PWR)
-
Power Supplies
-
Power Supplies to BT links
BT link can be powered by a separte power cable in the range 20-57V DC or by Ethernet cable (according to Power Over Ethernet IEEE 802.3at).
PoE injekctors availaible in our store:
PowerDsine 90001G-40- Gigabit PoE AC adaptér
- IEEE 802.3at
- AC input 100-240 V
- 40 W
- -10°C až 45°C
- datasheet
Phihong POE36D-1AT
- Gigabit PoE DC adaptér
- IEEE 802.3AT
- DC input 36-72V
- 33,6 W
- -20°C až 50°C
-
datasheet
To download
Software
-
RF PATH5.2 (ver. DB 4.0)Radio Planning Tool software to assist the design of microwave radio links. Radio link calculator compute the Fade Margin, Received Signal Strength, Radio Distance and more.
SNMP
-
MIB file2.7MIB file for BT radio links