- Transmit Capacity up to 350 Mbps Full Duplex
- SW optional speeds: 155 to 350 Mbps
- Moduation types: 4 to 256QAM
- ACM - Adaptive modulation and Coding
- Channel spacing: 40 or 56 MHz
- RF output power up to +15 dBm
- Duplex spacing 490 MHz or 530 MHz
- ATPC - Automatic Transmit Power Control
- Ethernet interface 1000Base-T / 100Base-Tx
- SNMP management, SNMP MIB file
- Power Over Ethernet, IEEE 802.3at (PoE+)
- Power Consumption up to 25 W (max. 30 W)
- FOD (Full Outdoor), IP-67
- Operational temperature -30 °C to +50 °C
Description
SDV 11G is a digital microwave communication device that provides wireless "point to point" link for transfer of data, voice and video. It is designed to be used in the 10,7-11,7 GHz licensed frequnecy band.
The radio supports full-duplex transmission speed 155 / 190 / 220 / 240 Mbps for 40 MHz channel width and 270 / 310 / 350 Mbps for 56 MHz channel width.
SDV 11G is designed as Full Outoor Unit (FOD) with direct mounting to a parabolic antenna. These properties give service providers great flexibility and speed in building up their networks. Top-quality components and durable cast-aluminium design allows radio link used in very difficult climatic conditions.
FEATURES
- Modulation: 32 QAM, 64QAM, 128QAM, 256QAM1
- Forward Error Correction - LPDC (Low Density Parity Check)
- ATPC - Automatic Transmit Power Control
- Software configurable channel frequency
- Software adjustable output power (up to 15 dBm)
- ACM - Dynamic switching of modulation schemes (in poor radio conditions)
-
Encryption radio beam against unwanted interception
-
Supports IEEE 802.3at Power Over Ethernet plus (PoE+)
- Supports IEEE 802.1q VLAN and VLAN double tagging.
- Supports IEEE 802.3x Flow Control
- Built-in BER, RSSI and Quality meter
- SNMPv1 protocol is implemeted (downloadable MIB file)
- Easy aligning with the Beeper, built-in RSSI meter or measuring the DC voltage
- Supports the transfer of "Giant Packet" about the size of 1916 bytes (used by some routers such as Cisco)
- SW upgrade to higher trasmission speed (by entering the license key).
- The choice of polarization by simply turning the transmitting device 90°
- Fast and easy installation
- Low power consumption
1Modulation 256-QAM is automatically enabled when you purchase a license for 128-QAM modulation.
datasheet |
Specification
General RF |
||||
Frequency range | 10,7 - 11,7 GHz | |||
Frequency stability | ±5 ppm | |||
Forward Error Correction | LPDC |
Transmitter |
||||
Output Power | +15 dBm | |||
ATPC | yes | |||
Output Power Selection | -7, -5, -3, 0, 3, 6, 9, 12, 15 dBm | |||
Output Power measuring accuaracy | 2 dB in the whole temperature range |
Receiver |
||||
____________ Channel spacing 40 MHz ____________ |
||||
Modulation | Capacity of radio (Mbps) | Real transmission rate (Mbps) | Sensitivity for BER 10-6 (dBm) | Sensitivity for BER 10-3 (dBm) |
128 QAM | 220 | 212 | -71 | -73 |
64 QAM | 190 | 188 | -74 | -76 |
32 QAM | 155 | 149 | -77 | -79 |
|
____________ Channel spacing 56 MHz ____________ |
|||
Modulation | Capacity of radio (Mbps) | Real transmission rate (Mbps) | Sensitivity for BER 10-6 (dBm) | Sensitivity for BER 10-3 (dBm) |
128 QAM | 310 | 303 | -68 | -70 |
64 QAM | 270 | 268 | -71 | -73 |
System specification |
||||
Ethernet Interface | 1000Base-T / 100Base-TX | |||
Summit management System | Windows GUI, Linux (WINE) | |||
SNMP v1 | MIB file included | |||
Power Supply and Cable |
||||
Power Over Ethernet plus | supports IEEE 802.3at (PoE+) | |||
Power consumption | up to 25 W (max. 30W) | |||
Cable | oudoor FTP, Cat 5e |
Antennas |
|||
Product | ANT 10A65 | ANT 10A90 | ANT 10A120 |
Parabolic antenna Ø (cm) | 65 | 90 | 120 |
Gain (dB) | 35,7 | 37,8 | 40,2 |
Environmental |
|
Operational temperature | -30 až 50°C |
Ingress Protection | IP-67 |
Mechanical |
|
Mechanical concept | Full Outdoor Unit (FOD) |
Dimension | 150 mm × 240 mm × 240 mm |
Weight | 3,5 kg |
Compliance |
|
Rádio | ETSI EN 302217-2-2-V1.4.1 |
EMI/EMC | ETSI EN 301489-1 |
Accessories
Antennas
-
Parabolic antennas 10GHz
ANT 10B35:
-
10,15 - 10,8 GHz
-
Diameter 35 cm
-
Gain 29,4 dBi
-
Operational temp. -40 °C to 55 °C
-
ETSI EN 302 217 Class3
ANT 10B65:
-
10,15 - 11,7 GHz
-
Diameter 65 cm
-
Gain 35,7 dBi
-
Operational temp. -40 °C to 55 °C
-
ETSI EN 302 217 Class3
ANT 10A90:
-
10,15 - 11,7 GHz
-
Diameter 90 cm
-
Gain 37,8 dBi
-
Operational temp. -40 °C to 55 °C
-
ETSI EN 302 217 Class3 (with absorb. material)
ANT 10A120:
-
10,15 - 11,7 GHz
-
Diameter 114 cm
-
Gain 40,2 dBi
-
Operational temp -40 °C to 55 °C
-
ETSI EN 302 217 Class3 (with absorb. material)
-
Power Supplies
-
Power supplies
The microwave link requires a power supply according to IEEE 802.3at (Power Over Ethernet).
PoE injectors available in our store:
PowerDsine 90001G-40- Gigabit PoE AC/DC injector
- IEEE 802.3at
- AC input 100-240 V
- DC output 56 VDC
- Output power 40 W
- -10°C až 45°C
- datasheet
Phihong POE36D-1AT
- Gigabit PoE DC/DC injector
- IEEE 802.3AT
- DC input 36-72V
- DC ouptpu 56V DC
- Output Power 33,6 W
- -20°C až 50°C
-
datasheet
To download
Firmware
-
CPU1.31Firmware pro processor upgrade.
-
DSP14/12/2011Firmware pro Digital Signal Processing upgrade.
Software
-
RF PATH5.2 (ver. DB 4.0)Radio Planning Tool software to assist the design of microwave radio links. Radio link calculator compute the Fade Margin, Received Signal Strength, Radio Distance and more.
-
SMS8.2.31The "Summit management System" is the grapical user interface used to manage and configure radio. There is no need to install it. The SMS runs on MS Windows or Linux using WINE.
Document
-
Datasheet SDV - 11 GHz
-
User manual SMSdocument 4.0User manual of the microwave links SUMMIT DEVELOPMENT (SDV, NARROW, ALTER).